I mentioned in another thread that I took my E36 to get rustproofed, and completely forgot to mention it here!

So, last summer, I took the car to Krown Rustproofing (https://www.krown.co.uk/) in Tipton, Birmingham. It's only been a few months since, so I'm not endorsing them yet, but the franchise is run by one friendly Latvian man, Robert, and he was perfectly content with my hanging around the work bay while he did his thing. Essentially, he gave the bodywork a rough clean first with compressed air and brushes (perhaps it would've been nice to see it get a more thorough clean), and then went into every nook and cranny he could possibly get his spray nozze into, and coated the bodywork with the Krown stuff inside out.

I had initially heard of them via an RX-8 forum in the UK, and they seem to be pretty well regarded in Canada too.

I found a few bubbly patches undernear the taillights. I'll have to just sand those down and respray those bits once my dad and I get around to painting the front grille frame.

The treatment cost £272, which seems pretty reasonable to me. I had toyed with the idea of going for a full CO2 blast and stuff, but that sorta work would cost £2-3k. Hopefully this holds up!

Another issue cropped up this week! I refilled my windscreen wash last Sunday, only to get a warning light on my dashboard and OBC saying that the fluid's low... on Tuesday.

Now, I know for certain that I had not been using the screen wash enough since Sunday to squirt through 5 litres of the stuff, so there must be a leak!

Today I finally had the time to check, and yep, there's a leak.

Not visible in the photo, but it seems to be dripping out somewhere from the rubber bit between the container and the pump. So it'll probably be one of three things:

  • The container (61678366420, £150): whatever plastic all the rubber fits to could be cracked.
  • The pump (61661377830, £50)
  • The rubber gasket between the container and the pump (61661365657, £1.50): The most likely culprit.

I'll see if I can get a new gasket first, since that's cheap as fuck to replace, and I can't really drive the car this time of year without windscreen wash anyway if it turns out to be something else.

    COUPLED At least I hope it will be! There's a buncha other stuff I need to spend money on soon ^^'7

      a month later

      I should make a thread about my station wagon. Actually, can you still call the Subaru Outback a wagon? It kinda blurs the lines. ^^'

        23 days later

        malmon That does sound like it'll cost more than the car is worth. Don't forget we're dealing with a sedan (not as valuable) and a gas bimmer (may fail and if it does it'll be expensive. I'd hold off on that and learn to do odywork instead.

            Rooky_Ghost uwotm8? I got a new primed frame from BMW for £225. We're planning on doing touchups ourselves, and even if I was to go for a full respray, it would cost less than I paid for the car (was informally quoted ~£5k).

            The sedans are plenty valuable here (much more practical than coupes and cabrios), and the M52 is pretty bulletproof assuming the previous owners weren't retarded.

              2 months later

              What a lovely machine you've got yourself there. Now that makes me want to save up for something myself, but 6000GBP is not something I will be able to afford anytime soon. Personally I'd love a second generation Impreza. Maybe someday. For now I'll have to do with my trusty corolla and the love of my life, my little Micra K11. I know it doesn't sound like much, and it isn't, but I truly love those light small little cars. She actually accelerates pretty decently at low speeds, but she gets tired fast at anything over 80KPH. Still, it's enough to get me to work and back, and have a tiny bit of fun. Despite all her flaws, I love her with all my heart. I only wish i had more money to take care of her. She deserves better. I did replace the brakes, oil, filters, and spark plugs though. That's the least I can do for her. I need to save up a bit and take care of her underside, she is very rusty down there. I want her to last as long as possible, my dream is to fix her up and then tune her a little bit. If I could move the battery to the rear, and maybe some other stuff as well, I'd have a bit of space to work with. I'd have to ask my car guy friend what would be the best way. Even a humble 90kW would be a massive increase from its current stock 60kW (not to mention it's a lightweight car, she doesn't need much to be nimble). I doubt the drivetrain would take any more anyway. Perhaps we could find some other Nissan engine that would fit without too much work and make more power, and then supercharge it.

              It's all just daydreaming though. I won't be able to afford even to fix her up properly anytime soon, and even if I had money to do what I want to her, I hardly have the knowledge how to, let alone space and tools to work with.

              Dreams are for free though.

                WorstFriend Thank you! Yeah, unfortunately, it's an expensive hobby. Not as expensive as, say, amateur piloting, but definitely on the high end of what the average person can afford.

                I remember a previous neighbour of mine had one of those Imprezas. The best sounding 4-cylinder engine in the world, in my opinion. They must be pretty expensive these days for a nice example... all the modern classics these days are :/

                The K11's pretty cool too! It's definitely one of the up and coming models in terms of popularity, I think. Rust is a cancer though. I don't know how bad yours is, but you might find that the cost of repairing the rust might outpace your saving rate. I was just talking to one of my work colleagues, one of his friends recently bought a rolling Micra shell to swap his drivetrain into, as his shell was rotten. 90kW would be pretty mad in a tiny car like that! I hope you can achieve your dream ^^

                My target for the E36 is 220kW. That's probably the best I can hope to get without putting a turbo in.

                    malmon

                    The best sounding 4-cylinder engine in the world, in my opinion.

                    I've heard the sound comes from the uneven exhaust lengths. I've heard their servicability is awful though. Hard to reach those cyllinders. Doesn't stop me from wanting one though. It's got all I want, It's a classic Japanese sports car with rally history, it's fast, it's all wheel drive, and my god is it pretty. Those blue bugeyes are one of the most kino looking cars, in my humble opinion.

                    As for my micra, I just got home from working on her with my dad. Front right brake got stuck and we had to fix it. The rubber seal around the cyllinder is broken and it got dirty, we'll have to order it and replace it. Wiper fluid pump is also broken. Oh and something's up with the reverse light, the bulb is fine, the sensor in the gearbox looks fine too, so we don't really know what's up with it. We looked underneath it, and it looks better than I thought. The doorsteps (I think that's what they're called in english, not sure though) are completely rotten, and a part in the front that I don't know the name of is as well, but the floor looks mostly fine. I'll save up some money and fix all of that.

                    As for tuning, it has also crossed my mind if it would be in some way possible to slap some electric motors on the back and make her hybrid AWD. Though if that mad idea is at all possible, it's probably beyond the scope of mine and my friends' abilities. I want to do something to her though. I want her to all nice and pretty, and faster and in some way unique to me. I also thought of making a DIY rally car out of her, she wouldn't need a lot of power and her brick like aerodynamics wouldn't be much of a problem, she'd just need some better supsension and stuff.

                    All those ideas, yet no skills tools or a garage. I've thought of buying mechanical school books they use in our vocational schools. I might do that. But there's so many little things like that, my budget really can't take that.

                    220kW in a naturally aspirated RWD car sounds like a lot of fun. I'm hoping you can achieve that.

                        WorstFriend I believe it's from unequal length exhaust headers specifically, but the entire exhaust setup probably plays a part. Sounds like it's exactly what you're looking for then ^^ I'm not actually aware of any other Japanese makes that did rally stuff... maybe Datsun/Nissan? But you'd probably have to go considerably older. I'm not super into the bug eyes personally, I quite like the facelift model, and the previous gen.

                        How did you find doing brake work? I've never done any, and it seems like a scary prospect ^^'7 Funnily enough, the washer pump for my E36 is also broken (well, it just leaks) - can't remember if I meantioned it in a previous post. Got a new bootleg one ordered.

                        Is your reverse light not turning on? The obvious thing would probably be with the wire or connector(s). Should be able to diagnose it with a multimeter, assuming it isn't super awkward to get to.

                        The "doorsteps" I think are called sills in English. The part in front... the wheel well? Both pretty common places for rust. Hopefully you or your dad can weld!

                        Just a plain electric conversion would probably be a lot easier than turning it into a hybrid... but turning it into a hybrid would be bloody awesome! You'd probably lose most of your boot space, and you might need one of those anti-wheelie wheel things dragsters have, but it would be awesome! Ultimately, if you have a place to do the work (most difficult thing), then if you're willing to learn, all you'll ever have to pay for it tools and materials, which are all far cheaper than labour. It really sucks if you're at the mercy of the outdoors though.

                        A rally build is probably the most expensive thing you could aim for. Rally cars are cool, but they go through one hell of a beating. It's no wonder there isn't much talk of rally in amateur circles... or at least I haven't heard much ^^'

                        220kW will be a challenge. I'm pretty sure I talked about it in a previous post, but it'll most likely involve replacing the intake with ITBs, a more aggressive camshaft, exhaust mumbo jumbo, and a lot of luck ^^'

                            malmon

                            Yes, something like that. I know what I mean, but the names and terms sometimes get mixed up in my head.
                            Didn't plenty of Japanese car makers did rally stuff? Mitsubishi and their Lancer, Toyota and their Celica, Mazda and RX-3 and RX-7, Nissan Pulsar, even Honda did a little bit of rally as far as I know.
                            Though none of them are as pretty as Impreza. Okay, maybe the celica.

                            But those don't have that super cool boxer engines.

                            The brakes were actually pretty easy. Lift the car up and take the wheel off, then take two bolts off, and you can remove the thingy that I don't know the name of again. The part that's pushed by the cyllinder and that pushes on the brake pads. We had to pry it with a screwdriver since the cyllinder was stuck of course. After that I had to push the brakes a couple times to push the cyllinder out a bit, my dad had some grease specifically for the brake cyllinder, and he also had a small funny little tool to push it back in. We did that three or four times and I think it's better now.

                            The brake light is probably the wires, but good luck finding the wires in all that jungle of pipes and cables. She passed MOT (or our equivalent) so it's not super high on my priority list for now.

                            ^ those are the thingies I'm talking about. All completely rotten. We'll take care of it when I have money. I know one grandpa in my town who does amazing welding jobs despite being horrifyingly senille. Does it for cheap too.

                            I don't care about boot space, I have corolla for that. I don't want anything crazy back there, but I don't even know what kind of electric motors are available. I would have no idea how to wire it all up to the throttle pedal, even if the motors were weak, they'd be in the rear and they'd probably still have more power than ICE in the front at low RPM. Maybe if i could somehow have them not active all the time. I don't think a lot of people are doing stuff like that, but I'd have to look in car forums anyway.

                            I didn't realise rally builds are so expensive... ;w;

                                WorstFriend Aw man, can't believe I forgot the Lancer ^^'7 But yeah, I guess you're right! It's been a long time since I've known anything about rally.

                                WorstFriend The brakes were actually pretty easy.

                                Huh, it does sound like they're pretty easy, as long as you've got the tools. But it also sounds like you didn't have to do anything like drain the brake fluid, which is a bit more complicated from what I've read...

                                WorstFriend The brake light is probably the wires

                                So is it brake light or reversing light? ^^' Either way though, I'm surprised that would get through an MOT! You can probably get a wiring manual for the car, that would at least give you something to look for. Still a pain to sort out if the cables are super buried though.

                                WorstFriend ^ those are the thingies I'm talking about.

                                Yeah, the sills. I hope you can get them fixed! Heh, maybe he just pretends to be senile to get people off his back :P

                                WorstFriend I would have no idea how to wire it all up to the throttle pedal

                                There are probably a few ways I could thnk of, depending on how your throttle works. If it's a physical throttle cable from the pedal to the throttle body, then you could maybe wire a motor controller up to the throttle position sensor, or if it doesn't have one, maybe piggy back some sorta potentiometer to the throttle body, the cable, or the pedal itself. If it's an electronic throttle, then you'd also have the option of tapping into the ECU.

                                WorstFriend I didn't realise rally builds are so expensive... ;w;

                                I don't know too much about it tbh, so maybe I'm just overly pessimistic, but my thinking is that while you could probably make a rally build for not too much money, the maintenance would be a huge drain on your wallet, as it seems like it would be quite hard on the car. Although... maybe rallycross would be a better option?

                                    malmon

                                    Ah, yes, I meant reverse light of course. My brain short circuited.

                                    Although... maybe rallycross would be a better option?

                                    Maybe. Anything that would make her cool would work.